一种拦截机动目标的最优制导律设计

引入伪控制变量的概念,建立了线性化的描述导弹与目标相对运动的状态方程.应用线性二次型最优控制理论和改进剩余时间的计算方法,提出了一种拦截高机动目标的最优制导律.通过与比例导引律在平面拦截过程中的仿真结果对比分析,表明所提出的最优制导律在拦截机动目标时更为有效.     

MIMO雷达和组网雷达的CA2CFAR检测性能比较

多输入多输出(MIMO)雷达是近几年出现的一种新雷达技术,也是近几年雷达领域研究的重点。建立MIMO雷达的信号模型,明确给出MIMO雷达进行CA2CFAR检测的检测概率和虚警概率解析表达式,对组网雷达和MIMO雷达在均匀杂波背景下CA2CFAR检测性能进行了分析对比。仿真结果表明。MIMO雷达对类似噪声特性的复杂目标具有更好的检测性能。     

基于性能的装备采购合同商选择研究

根据基于性能的装备采购目标,在考虑合同商满足军方提出的性能指标的基础上,从合同商的资质、生产技术能力、装备价格成本、装备保障性能、管理运营情况和双方协商沟通水平等方面建立了合同商选择评价指标体系,并运用层次变权综合决策方法进行综合评判。案例分析表明：该方法能充分反映决策者的意愿,使合同商的选择更好地满足基于性能的装备采购的需要。     

升力式飞行器对地面固定目标攻击方式研究

通过对变结构导引下升力式飞行器直接撞击目标和制导炸弹攻击目标两种攻击方式的仿真计算,发现升力式飞行器直接撞击时虽然能够进行大范围机动,但是攻击目标单一、命中速度低,而制导炸弹攻击时,虽然能够攻击多个目标,命中速度高,但是打击范围小。综合两种方式的优点,对一种组合方式攻击进行仿真计算,发现采用该方式攻击不但能够通过大范围机动对多目标实施打击,而且还能保证较高的命中速度,验证了该组合攻击方式的可行性。     

装备体系贡献率评估综述

随着装备体系化作战模式在军事活动中的深入运用,其表现出的优势已被世界军事强国高度关注,装备体系贡献率作为衡量装备成体系化建设与作战运用优劣程度的重要指标,已成为当前军事学术中研究的热点.系统梳理与归纳了国内外对装备体系贡献率评估需求、评估理论、评估方法的研究现状,总结出研究成果中存在的问题,为下一步开展装备体系贡献率研...     

基于故障树分析的航空装备体系结构贡献率评估方法

针对航空装备体系构成复杂的特点,将故障树分析引入航空装备体系结构贡献率评估问题,提出基于故障树分析的评估方法。从作战装备、信息支援装备和保障装备三个方面构建航空装备体系结构,建造航空装备体系结构故障树;采用底事件的关键重要度指标来计算航空装备的体系结构贡献率,建立基于关键重要度的航空装备体系结构贡献率评估模型;以某航空装备体系为例进行建模分析。分析结果表明:所提方法能够准确评估航空装备体系结构贡献率,为确定航空装备体系结构短板、优化航空装备体系结构等提供方法支撑。     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Increasing of photostability of HNS explosive in the presence of UV photostabilizers

The photostabilies of hexanitrostillbene(HNS)were studied at 1％wt.of photostabilizers.The photo-stabilizers of Chiguard BP-12(UV-531),ADK STAB LA-326(UV-326),ADK STAB LA-32(UV-P),Irganox 1010 and Everstab LS944 were used in this study.A photoreactor including a 30 W monochromatic UV lamp was used for investigation of photodegradations of solid HNS.The changes in surface area of HNS peak in HPLC chromatogram at time intervals of 2,4,6 and 8 h were used for calculation of kinetic rate constants of photodegradation process.The compound of UV-P photostabilizer was found to have the greatest effect on enhancing photostability for HNS among the investigated photostabilizers.The kinetic rate constants were obtained 6.2 × 10-2 and 4.1 × 10-2 h-1,respectively,for photodegradation process of HNS in absence and in presence of UV-P.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.